Innomesh v3.6.1 Hotfixes

Hotfixes deployed to production during the v3.6.1 release cycle. For the features introduced in this release, see v3.6.1.

Each hotfix is listed under the date it reached production. Australia and the US/EU regions deploy on different days, so both dates are given where they differ.

2026-10-09 (AU) / 2026-10-12 (US, EU)

On Innomesh Portal, a device that is newly deployed, or replaced with a like-for-like device, is now checked against its time-based and property-based automation policies within about 15 minutes, or about 30 minutes for a brand-new device that Sight has to discover first. Previously this could take up to an hour for a property-based policy, or up to a day for a daily time-based policy. Each policy still runs its actions at its own trigger time, such as a maintenance window. See Evaluation After a Hardware Change.
On Innomesh Portal, newly deployed and replaced devices are now recorded in Administration > Logs, under a new Asset Lifecycle logs option in the Log Type filter. The same option is available in Room Manager.
On Innomesh Portal, added Run Policy Actions to the Asset Information page, to run an automation policy’s actions on the device straight away, regardless of the policy’s trigger time and conditions. Time-based and property-based policies that set up a newly deployed device can be marked as Onboarding, so that All onboarding policies runs them all together. See Manual Policy Runs.
On Innomesh Portal, fixed an issue where time-based automation policy filters ending in $ did not match any assets.
On Innomesh Portal, the Associate Alerts and Remove Selected actions are no longer shown on resolved or closed incidents.
On Innomesh Portal, fixed an issue where the Valid Values setting for asset fields was not available on some tenancies.
Fixed an issue where an asset going offline was sometimes not detected straight away, delaying its offline alert.
Fixed an issue where asset alerts were not raised for assets whose name contains a double quotation mark (").
In Room Manager, fixed an issue on the Information tab where deleting a blank field did not take effect after the room was deployed.
In Room Manager, Download as JSON in the template and room Options menus is renamed to Download Template Config and Download Room Config.

2026-09-25 (AU) / 2026-09-28 (US, EU)

In Room Manager, uploading a room configuration to a duplicated room now applies the Room Name and Room ID from the file. These are still ignored when uploading to an existing room, as they cannot change once a room is created.
In Room Manager, fixed an issue on the Information tab where none of the copies of a required room field could be deleted when more than one was present. Duplicate copies can now be deleted, as long as one copy remains.
In Room Manager and on Innomesh Portal, the Qbic Remote Viewer now connects to the touch panel by its IP address rather than its hostname. This resolves browser issues when the Remote Viewer is used on the same local network as the touch panel.
On Innomesh Portal, for users assigned a SAML role, the user groups inherited from that SAML role are now shown, in the same way as inherited roles.
On Innomesh Portal, fixed an issue where an asset’s Ops actions menu was cut off when the asset had more than 10 actions.
On Innomesh Portal, refined the mobile view of the Administration > Alert Severity Rules page.
Fixed Endpoint Temperature alerts intermittently failing to raise without error. The default threshold has also been raised from 45 to 60 degrees Celsius, as 45 was too low.

2026-09-18 (AU) / 2026-09-21 (US, EU)

In Room Manager and on Innomesh Portal, added the Qbic Remote Viewer for remotely connecting to a room’s Qbic touch panel, available to users with the required permission.
On Innomesh Portal, released the Asset Last Seen feature to the Assets Register. A new Last Seen column shows when each device last responded, with sorting, filtering, and CSV export for stocktake and audit workflows. See Assets Overview for details.
On Innomesh Portal, introduced tabs to the pages under Administration > Settings to align with other Administration sections.
On Innomesh Portal, the asset state history now has a checkbox to show or hide connection states.
On the Innomesh Portal Q-Sys Global Vitals page, the CPU, memory and disk usage charts now show values per device rather than an average across all devices.
On Innomesh Portal, fixed an issue where asset actions could not be triggered from the Assets Register.
Improved the performance of the Appspace integration.
In Room Manager, fixed an issue where some rooms failed to open for editing because of an error decoding device passwords.

2026-09-11 (AU) / 2026-09-14 (US, EU)

Resolved an issue where deployment progress updates could be processed out of order, leaving room deployments stuck as deploying.
Fixed an issue where a failed room or system deployment could leave the room unable to be edited or redeployed.
In the Q-Sys integration, fixed an issue where extended device properties were blank on first load.
On Innomesh Portal, fixed an issue where tooltips did not display correctly on the dashboard view.
In Room Manager, corrected the alignment of the “Deploy” button.
In meshIQ, fixed an issue where the session would not refresh its access token on expiry, causing a “RECONNECT” error after 60 minutes of inactivity on the meshIQ screen.

2026-09-04 (AU) / 2026-09-07 (US, EU)

On Innomesh Portal, fixed an issue where the CSV download on the Information page did not respect the applied column filters.
On Innomesh Portal, column filters are now retained when navigating back to a page from one of its child pages, rather than being reset.
On Innomesh Portal, for users assigned a SAML role, the “Role” column now also lists the roles inherited from that SAML role, shown in italics and marked with an asterisk (*).
In meshIQ, asset actions, scheduled actions, and automation policies can now be run from the chat.
In meshIQ, added role-based access control. Answers and actions are limited to the user’s Portal permissions.
In meshIQ, insights now use the tenant’s time zone, shown in a pill on the chart panel.
In meshIQ, stopping a request now cancels it fully.
In meshIQ, fixed a lag when typing in the chat.
In meshIQ, fixed errors and timeouts for tenants with Pulse-only zones and no Space rooms.
In meshIQ, added the feedback icon to error cards in the chat.
In meshIQ, updated the chat and query interfaces.

2026-08-21 (AU) / 2026-08-24 (US, EU)

On Innomesh Portal, resolved an issue where the “Always Override” option in room information settings would not take effect.
On Innomesh Portal, corrected a table alignment issue in the Hotlist when navigating between tabs.
On Innomesh Portal, fixed an issue where the “Resurfaced” tag would not display for resurfaced alerts in the Hotlist “Resolved” table.
On Innomesh Portal, Hotlist tables now remain on the page being viewed after a refresh, rather than returning to the first page.
On Innomesh Portal, improved the time taken for asset fields to populate on the Assets Register after a room is deployed.

2026-08-17 (AU) / 2026-08-18 (US, EU)

On Innomesh Portal, resolved an issue where critical alerts would not appear in the “Active” tab unless a filter was applied for them.
On Innomesh Portal, fixed an issue with downloading the CSV for the Assets Register, where a large dataset could cause a file size limit failure.
On Innomesh Portal, fixed an issue in Room Support View where the room status tags on the top right would not show until the user selects “Refresh”.
On Innomesh Portal, fixed an issue in Room Support View where the schedule pane could fail to render bookings correctly.
On Innomesh Portal, removed the ability to create asset profiles, to prevent asset profile drift and eliminate cases of incorrect and incomplete asset profile data. New asset profiles can now be requested from the UXT support desk.
On Innomesh Portal, resolved a navigation issue with the Data Import/Export menu.
In Room Manager, restored editability of the serial number field under the Device Configuration tab, with automatic propagation to the “Device Information” tab so it is marked as “User Defined” when manually entered.

2026-08-10 (AU) / 2026-08-11 (US, EU)

In Room Manager, resolved a merge issue in Space CE when pulling the template to the room with the “Align room options to template” checkbox deselected.
On Innomesh Portal, resolved an issue in the room information view where the profile photo could fail to display when selected before it has a chance to load.
On Innomesh Portal, images in the room information view now download reliably.
On Innomesh Portal, numeric filter options are now available in tables where they were previously missing (greater than, less than, and similar).
On Innomesh Portal, fixed sorting of the “Alerts” column on the Rooms page.
On Innomesh Portal, resolved an issue where the Audit Logs page would return to the first page after refreshing, rather than remaining on the page being viewed.
On Innomesh Portal, corrected the alignment of the submission button on the error reporting form.

v3.6.1 Hotfixes